![]() ![]() Step 2: Tell SANE to run as a server (saned) systemd only Execute at a terminal: sudo nano /etc/systemd/system/saned. The backend implements both the USB interface and network interface (using Canon's BJNP and. As I read at FS54786 : sane unable to share network scanner, saned is unable to provide this functionality for scanners that are. The sane-pixma library implements a SANE (Scanner Access Now Easy) backend that provides access to Canon PIXMA / i-SENSYS / imageCLASS / imageRUNNER multi-function devices (All- in-one printers) and the Canon CanoScan Flatbed/TPU scanners. Unfortunately, this software relies on your scanner being shared via saned, if I understand these instructions correctly. ![]() See the Scanners page for help setting up and troubleshooting sane. following a recommendation in the forum, I tried Qoppa PDF Studio as a PDF processing tool. First, install xsane which is a frontend for SANE: Scanner Access Now Easy. If your scanner is a network attached scanner, you need to get it working on your saned server before sharing it out on the network. In accordance with How to set up your scanner to work with Sane and PDF Studio under Fedora 27 Linux’s systemd – PDF Studio Knowledge Base, the file has to be amended as follows: Įnvironment=SANE_CONFIG_DIR=/etc/sane. Now we will proceed to configure the printer server to share a scanner as well. Meanwhile, I was able to make some progress. ![]() Or, in other words, the scanners have to be presented to Qoppa PDF Studio via saned, which appears to be different to, for example, xsane. Guess we are misunderstanding each other.Īs indicated by the “No saned found at ” error message, Qoppa PDF Studio wants to contact a saned interface locally, in order to access the scanner. Network Scanner Setup with SANE I could probably get it working as a locally attached scanner, but I want it to work over the network just as the printer works. For USB multifunction devices the multifunction aspect could make it troublesome in other Linux distributions that may use the SANE upstream way to set scanner device nodes to group 'scanner' and add the users to that 'scanner' group which conflicts with the CUPS backend that usually needs 'lp' group read/write access to access the printer unit. You might need to setup Saned to use the printer on your machine, but the sharing is done via the ethernet connection. My scanner (scanner function of the MX860 multifunction printer) was being recognized using the sane-find-scanner command or using scanimage -L. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |